Home Company Products Contacts Site map

  Metal Gaskets
KLINGERmaxiflex spiral-wound gaskets
Overview - page 1
Wide choice of materials for metal
strip and filler. Suitable for high pressures and temperatures.
Recommended for flanges with
tongue and groove.
Solid metal outer ring used as a
centerring device and compression
Used on raised face and flat face
Solid metal inner ring.
Use with high pressures and
Male to female flanges.
Standard Metal strip materials
1.4301 304
1.4401 316
1.4404 316 L
1.4541 321
1.4571 316 Ti
Gasket thicknesses
Nominal thickness Compressed thickness  Guide ring  thickness
3.2 mm 2.3 - 2.5 mm 2 - 2.2 mm
4.5 mm 3.2 - 3.4 mm 3 - 3.3 mm
7.2 mm 5.0 - 5.5 mm 5 - 5.5 mm
Special version:
Monel 400®, InConel 600®, InConel 625®, InConel X750 ®, Nickel 200®, Titanium, Incoloy 800®, Incoloy 825®
Other materials on request
The design principle of the KLINGER Spiral-Wound Gaskets
The basic element of every gasket is the wound core. The V-shaped metal strip is spirally wound with the softmaterial filler.
To improve the mechanical strength and other sealing characteristics,
some layers at the beginning and at the end are wound without soft
material and spot-welded over the total circumference.
The constant tensile force during the complete winding process permits
a defined, constant thickness of the structure.
This gives the gasket recovery forces which provide for a reliable surface load even at fluctuating operating conditions.
In the present 8 versions, the basic element is added by inner and/or outer rings as needed.