Home Company Products Contacts Site map

products

SUPERLOK® Tube fittings > STUB TUBE CONNECTOR > SRPC Reducing PortConnector




 

SRPC
Reducing Port Connector

     

Connects Fractional SUPERLOK Port To Male AN


Part No. Tube O.D. D1 (inch) Reduced Tube O.D. D (inch) d E I I1 L
SRPC 2 - 1 1/8 1/16 0.76 6.09 8.63 2.03 17.27
SRPC 4 - 1 1/4 1/16 0.76 9.39 8.63 3.55 18.03
SRPC 4 - 2 1/4 1/8 2.28 9.39 13.46 3.30 22.60
SRPC 6 - 2 3/8 1/8 2.28 12.70 13.46 3.81 23.11
SRPC 6 - 4 3/8 1/4 4.82 12.70 15.74 3.30 24.89
SRPC 8 - 4 1/2 1/4 4.82 15.74 15.74 3.81 29.21
SRPC 8 - 6 1/2 3/8 7.11 15.74 17.52 3.30 30.48
SRPC 12 - 8 3/4 1/2 9.90 22.09 24.38 3.81 37.84
SRPC 16 - 8 1 1/2 9.90 28.44 24.38 4.82 42.67
SRPC 16 - 12 1 3/4 14.98 28.44 25.90 4.06 43.43
* ISO Tapered Threads are available upon request
 
Installation Instructions Port Connector
  • Remove nut and ferrules from the first of two SUPERLOK ports to be connected.
  • Slip nut ( no ferrules) over machined ferrule end of port connector.
  • Insert port connector into SUPERLOK port 1 and snug by hand.
    Tighten with wrench 1/4 turn only. For 1/8, 3/16 in., 2, 3, and 4mm tube fittings, tighten only 1/8 turn. Subsequent connections are made by tightening slightly with a wrench after snugging the nut by hand.
  • Insert other end of port connector into SUPERLOK port 2 and tighten nut 1 1/4 turns from finger-tight.
    For 1/16, 1/8, 3/16 in., 2, 3, and 4mm tube fittings, only 3/4 turn from finger-tight is necessary.
 

All dimensions in millimeters unless specified as "inch"